MAYCO STROKE & COAT – SC014 – JAVA BEAN

$3.95$18.75

Clear

Stroke & Coat® (The Wonderglaze) is the industry’s most versatile product. It can be applied on wet clay, earthenware bisque or stoneware bisque, fired from cone 06 to cone 10, in oxidation or reduction and used in every decorative way imaginable. Stroke & Coat® can be the star of your work or play a supporting role to other glazes. It is the ideal product of choice for the studio, classroom, potter, and fine artist. 

Speckled Stroke & Coat® glazes are Stroke & Coat® colors with small specks of contrasting hues to add dimension and visual appeal to your creations.

 

General Use

One coat will create a translucent finish with subsequent coats increasing opacity. We suggest 2-3 coats for opacity and all over coverage. Let dry between coats. Stroke & Coat® glazes will fire to a gloss finish without clear glaze. However, if desired, a clear glaze may be added. For application on clay, we recommend leaving an area unglazed, such as the back or bottom of the ware, to allow for out-gassing of water and organic materials during the firing process. Stroke & Coat® glazes have been formulated to mature at shelf cone 06/05. Most Stroke & Coat® glazes will maintain their color at higher temperatures, especially reds, oranges, yellows, greens and blues. Their performance changes at cone 6 is noted on each individual product label. We recommend testing prior to use. For more information on mid-range performance, Click here to view Mid-Range firing guide PDF

Stroke & Coat® glazes are certified AP non-toxic and food safe.

 

Helpful Hints

  • SC-13 Grapel, SC-33 Fruit of the Vine and SC-85 Orkid are formulated with chrome-tin pigments and can be sensitive to non-toxic clear glazes; namely – a milky/cloudy haze may form over the colors. Test by adding a light application of the clear glaze to these colors. These colors will not fade when used with Mayco’s Clear One Dipping (NT-CLR).
  • SC-70 Pink-a-Dot is more translucent than other Stroke & Coat® glazes. Additional coats (more than 3) may be necessary to achieve opacity.
  • Stroke & Coat® glazes do not move or blend when used with other glazes. You can apply side-by-side or layer without losing the integrity of the design.
  • Can be applied with a brush, sponge, detailer bottle, mats, stamps or silkscreens.

Application Recommendations

The following application recommendations are based upon the original product development intent and use for the product. Information on alternative application methods is listed in the section “Usage Variations and FAQ’s”.

 

  • Shake for 5-6 seconds before use. Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).
  • For all-over coverage, we recommend using a broad bristled soft brush.
  • One coat will produce a translucent finish with subsequent coats increasing the opacity. For most applications, three coats will be sufficient for complete opaque coverage.
  • When the “wet look” has gone from the first coat you may apply the next coat of Stroke and Coat flowing rather than brushing the coats of glaze.
  • Let dry and fire to shelf cone 06 or 05. We do not recommend “force” drying (using a hairdryer, for example) as you may experience cracks or crevices in the fired finish.

Usage Variations and FAQ’S

 

Q: Do I have to use clear glaze to achieve a glossy finish?

A: Stroke & Coat® fires to a gloss finish and does not require a clear glaze. Clear glaze may be used to enhance the glossiness of the fired finish. Apply the clear glaze according to manufacturer’s directions over the unfired Stroke & Coat®and fire once. Note: The amount of non toxic glaze deposited can affect the fired results. If too much glaze and clear glaze is applied you may experiences dull or “milky” fired finishes. If this occurs, adjust the number of glaze layers applied, lighten the amount of glaze on your brush, etc. – whatever is needed to reduce the total amount of glaze placed on the ware. For pieces already fired – you may improve the fired finish by refiring either at shelf cone 06 or cone 05 and adding a hold/soak time at the end of the firing cycle (10-15 minutes).

 

Q: Are Stroke & Coat® glazes luster compatible?

A: All colors are luster compatible.

 

Q: How can I create dimensional effects with Stroke & Coat®?

A: Stroke & Coat® will remain moderately dimensional when applied in a concentrated area. To create a raised line with a brush: layer 4 to 6 coats, allowing each coat to dry before applying the next. You can also use a detailer bottle or slip trailer to create raised lines: apply 2-3 layers, again allowing each layer to dry between applications.

 

Q: How do I achieve best results when applying Stroke & Coat® to greenware/clay?

A: Gases and moisture will escape from the greenware during firing, so it is best to leave a portion of the ware unglazed – for example: the back of a tile, the foot of a vessel- to avoid pin-holing or craters. If you do completely glaze a greenware piece you may also experience a dulling of the gloss finish. If this occurs you can apply a clear glaze and refire to cone 06 or cone 05 to get a gloss finish. Always test to see if Stroke & Coat® will work on your specific greenware project.

 

Q: What are the guidelines for firing Stroke & Coat® to higher temperatures (cone 6 – cone 10)?

A: Many of the Stroke & Coat® colors perform well at mid-range (cone 5-6) and high (cone 9-10) temperatures. Darker colors – green, red, blue, orange, purple – will maintain much of their original color value (they may darken a bit compared to cone 06 results). Lightly pigmented colors – pink, yellow, tan, lighter purples – will fade. Always test to see if this application variance will work on your specific project. The cone 6 color information is found on the left-hand side of the label for each Stroke and Coat® color (under “Special Notes”). Mayco recommends testing for clay body compatibility prior to use on work.

 

Q: Can Stroke & Coat® be used with other products?

A: Stroke & Coat® glazes are compatible with all Mayco glazes and with many alternative brands of glazes. It is not recommended to design on top of the fluid, moving glazes, such as Jungle Gems™, Pottery Cascades™ or Elements™, as then work may become distorted.

 

Q: What makes Stroke & Coat® glazes different from other glazes?

A: Stroke & Coat® is a heavy-bodied glaze that levels out and heals imperfections during the glaze application process. It can withstand over firing without fading and it is tolerant of many types of bisque and clay bodies. It is not fluid like many gloss glazes – it behaves more like a traditional underglaze as it “stays put” where it is applied. It’s like having 4 or 5 different glazes in one bottle – a Wonderglaze™ for bisque and clay.

Reviews

There are no reviews yet.

Be the first to review “MAYCO STROKE & COAT – SC014 – JAVA BEAN”

This is such a great place if you are a starving artist who is a clay addict! The employees are so helpful and Marcie and Quinn are great! I love how they have their own line of glazes and clays to choose from. I favor their Whitestone stoneware. It is a finely compounded stoneware with a porcelain appearance and feel, great for throwing on the potters wheel... Y'all should visit this store if you love exceptional quality materials and customer service. Five stars all day!

Cameron B. Gig Harbor, WA