SKUTT – ENVIROLINK
$195.00
This item requires a SPECIAL ORDER from the manufacturer.
Special order lead times vary but expect a minimum of 6-8 weeks.
This item is available online for QUOTE only, you may still add to your cart but you will only be able to submit a Request for Quote, no payment will be collected at checkout. We will confirm details of your order and send you a quote for your approval including desired delivery method before the special order item is produced for you.
You may also place an order by calling us at 1-800-952-8030 during our normal business hours.
WHEN ORDERING THIS PART YOU MUST SPECIFY IF THIS IS FOR A:
KM Kiln
KMT Kiln
KM Kiln w/Linkboard
The EnviroLink allows your controller to turn your EnviroVent 2 on or off based on how you program the kiln. Often times people will forget to turn on or off their vent. With the EnviroLink the controller does it for you. It is very easy to install. Simply plug your vent into the EnviroLink and connect the control wire from the EnviroLink into output 4 of your KilnMaster Controller. If you have a Kilnmaster kiln with a LinkBoard it is even easier, just plug the control wire into the socket on the side of the kiln.
There are 3 different settings on your kilnmaster you can set to control the envirolink which located in configurations section of programming menu.
Option A – In ConeFire Mode the Vent will turn on when you press start and will turn off when the kiln reaches 150 F (65 C). In Ramp/Hold Mode the controller will ask you if you want the vent on or off for each segment programmed. This is the same for all 3 options.
Option B – During a ConeFire Program the vent is on up to 1450 F (788 C) and then turns the vent back on during the cooling cycle at 1000 F (538 C) and stays on until the kiln reaches 150F (65 C). This setting for those people firing Crystal Glazes.
Option C – During ConeFire Mode the Vent stays off throughout the entire firing.
Reviews
There are no reviews yet.